Moisture Inspection Kits

This complete moisture and humidity testing kit features the multifunctional Tramex MRH III digital moisture meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing.

The MRH III and reusable relative humidity probe allow for testing relative humidity, temperature and dew point in the environment. When used in conjunction with the infrared surface thermometer, detrimental condensation conditions conducive to microbial growth can also be identified. The heavy-duty pin-probes measure moisture content in wood, and the insulated 7” pins allow for deep wall cavity probing. Concrete slab relative humidity testing to ASTM F2170 can also be performed with reusable relative humidity probes.

Features:

• Deep signal, non-destructive penetration up to 1¼" in wood and drywall in non-destructive mode.
• Detects moisture through paint, wall coverings, drywall, ceramic tiles, floor coverings, wood, roof coverings and most building materials.
• Hold function “freezes” meter reading when inspecting areas where the meter face is not visible.
• Audio signal sounds when meter indicates high readings.
• Large clear backlit digital display giving meaningful readings.
• Accurate non-invasive moisture content readings from 5 to 55% MC in wood.
• Attachable pin-type wood probe for accessing hard to reach areas and for probing into wall cavities and wood.
• Attachable Relative Humidity probe for testing of relative humidity, temperature, dew point and grains per pound readings all shown on one clear display.
• All Tramex products carry a full satisfaction guarantee including a one year warranty against defects in parts & workmanship.

Contents:

• MRH III – Moisture and humidity meter.
• RHP-SW - Attachable RH Probe for ambient readings of RH%, Temp., Dew Point & GPP.
• IRTX Infrared surface thermometer.
• HH14TP30 Heavy duty pin-type probe for wood.
• SP200 Long insulated pins for deep wall inspection.
• HA21SP52 Heavy duty hammer pin-type probe for wood.
• SAL75 Calibration Check Salts for RHP-SW
• Heavy duty carry case.

A compact kit for instant and precise moisture testing of concrete and wood flooring. The Tramex CMEX II digital moisture meter allows the user to non-invasively test concrete per ASTM F2659, and the Hygro-i2 ® Relative Humidity probe for testing relative humidity, temperature and dew point in the environment, or performing BS 8201, 8203, 5325 & ASTM F2659 & ASTM F2170. The Tramex heavy-duty wood pin-probe measures the moisture content of wood. The Flooring Inspection EZ Kit comes in a Tramex Easy-travel case.

Features:

• Instant concrete moisture content test from 0 - 6.9% with CMEX II to ASTM F2659.
• Fastest, most reliable, Hygro-i2 ® Relative Humidity probe for testing to BS 8201 & ASTM F2170.
• Perform multiple tests simultaneously.
• Re-usable Hygro-i2 ® Relative Humidity probes prove to be the lowest cost per BS 8201 & ASTM F2170.
• Test ambient site conditions of Temperature, RH, Dew Point & Mixing Ratio.
• Backlit display for ease of reading in low level lighting.
• All Tramex products carry a full satisfaction guarantee including a one year warranty against defects and parts & workmanship.

Contents:

• CMEX II Non-destructive, digital concrete moisture meter.
• Hygro-i ® RH probe and connector cable with ASTM F2170 tools.
• HH14TP30 Heavy-duty pin-type probe for wood.
• 6 Hole liners to perform concrete floor RH testing to ASTM F2170.
• Easy-travel case.