Browse Categories
Browse Departments
Tramex MRH III Digital Moisture and Humidity Meter (meter only)
The MRH is a digital display version of the Tramex Moisture Encounter MEP hand-held electronic impedance moisture meter. It operates on the principle of non-destructive impedance measurement. Parallel co-planar electrodes are mounted on the base which, during operation, transmit a low-frequency signal into material under test. To carry out moisture tests simply press the MRH firmly against the surface being tested and take a reading. Easy. There’s no surface damage and no waiting. The MRH has 5 different measurement scales: Wood, Roofing, Masonry, Drywall and Laminate, which can be selected to suit the material that is under test.
With the optional Relative Humidity Probe the MRH III automatically changes to hygrometer mode. This then provides the ideal solution for the measurement of humidity, temperature and dew-point in structural materials such as concrete flooring, walls, etc., as well as the environmental conditions within the building or structure. Humidity readings are displayed in both Percentage Relative Humidity (%RH) and mixing ratio (grains/lb or grams/kg).
With the optional Relative Humidity Probe the MRH III automatically changes to hygrometer mode. This then provides the ideal solution for the measurement of humidity, temperature and dew-point in structural materials such as concrete flooring, walls, etc., as well as the environmental conditions within the building or structure. Humidity readings are displayed in both Percentage Relative Humidity (%RH) and mixing ratio (grains/lb or grams/kg).